Mam również problemy z kontrolerem Ethernet RTL8111. W ogóle nie działa na Ubuntu x64.
To jest moja karta:
$ lspci -nnk | grep -i net -A2
05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
Subsystem: Gigabyte Technology Co., Ltd Motherboard [1458:e000]
Kernel driver in use: r8168
Testowałem to z następującymi wersjami amd64:
Mint 16 | Kernel 3.11 | r8169 & r8168 not working
Debian 7.2 | Kernel 3.2 | r8169 & r8168 not working
Ubuntu 13.10 | Kernel 3.11 | r8169 & r8168 not working
Ubuntu 12.04.3 | Kernel 3.8 | r8169 & r8168 not working
Ubuntu 12.04.2 | Kernel 3.5 | r8169 & r8168 not working
Ubuntu 12.04.0 | Kernel 3.2 | r8169 & r8168 not working
Ubuntu 11.10 | Kernel 3.0 | r8169 & r8168 not working
Debian 6.0.7 | Kernel 2.6 | r8169 working fine, r8168 working fine
Ubuntu 10.04.4 | Kernel 2.6 | r8169 working with known problems, r8168 working fine
Smos1.2 (Debian) | Kernel 2.6 | r8169 working with known problems, r8168 working fine
Wniosek: Rev 06 wersji RTL8111 / 8168 nie działa powyżej jądra AMD64 2.6
- Ten nic działa ze wszystkimi jądrami i386.
- Nie działało z ndiswrapper na amd64.
Regresja:
- Umieściłem na czarnej liście sterownik r8169 i zainstalowałem 8.036.00 na dkms na podstawie tego postu przez praseodym .
- Próbowałem też pakietu 037.deb ze startera bez powodzenia
- Próbowałem statycznego adresu IP / dhcp, ale połączenie nie działa.
Chciałbym zaoferować niewielką darowiznę BTC, taką jak 0,03 BTC, na działające rozwiązanie, ponieważ potrzebuję tego jak najszybciej.
Oto lista informacji i dzienników:
$ uname -a
Linux miner-rig1 3.8.0-34-generic #49~precise1-Ubuntu SMP Wed Nov 13 18:05:00 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
$ lspci -nnk | grep -i net -A2
04:06.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Allied Telesis AT-2500TX/ACPI [1259:2503]
Kernel driver in use: 8139too
--
05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
Subsystem: Gigabyte Technology Co., Ltd Motherboard [1458:e000]
Kernel driver in use: r8168
$ cat /etc/network/interfaces
auto lo
iface lo inet loopback
$ cat /etc/resolv.conf
# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
# DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
nameserver 127.0.0.1
search fritz.box
$ cat /etc/hosts
127.0.0.1 localhost
127.0.1.1 miner-rig1
# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
$ cat /etc/udev/rules.d/70-persistent-net.rules
# PCI device 0x10ec:/sys/devices/pci0000:00/0000:00:15.0/0000:05:00.0 (r8169)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="94:de:80:a7:c4:ea", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# PCI device 0x10ec:/sys/devices/pci0000:00/0000:00:14.4/0000:04:06.0 (8139too)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:30:84:2a:cc:12", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
$ ifconfig
eth0 Link encap:Ethernet HWaddr 94:de:80:a7:c4:ea
inet6 addr: fe80::96de:80ff:fea7:c4ea/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:16 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:370 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1522 (1.5 KB) TX bytes:0 (0.0 B)
Interrupt:76 Base address:0xe000
eth1 Link encap:Ethernet HWaddr 00:30:84:2a:cc:12
inet addr:192.168.188.41 Bcast:192.168.188.255 Mask:255.255.255.0
inet6 addr: fe80::230:84ff:fe2a:cc12/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:16182 errors:0 dropped:0 overruns:0 frame:0
TX packets:36773 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1304413 (1.3 MB) TX bytes:35558704 (35.5 MB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:64402 errors:0 dropped:0 overruns:0 frame:0
TX packets:64402 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:90356022 (90.3 MB) TX bytes:90356022 (90.3 MB)
$ route -n
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.188.1 0.0.0.0 UG 0 0 0 eth1
169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth1
192.168.188.0 0.0.0.0 255.255.255.0 U 1 0 0 eth1
$ dmesg
[ 0.309661] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 0.309676] pci 0000:05:00.0: reg 10: [io 0xb000-0xb0ff]
[ 0.309701] pci 0000:05:00.0: reg 18: [mem 0xfe600000-0xfe600fff 64bit]
[ 0.309717] pci 0000:05:00.0: reg 20: [mem 0xd0900000-0xd0903fff 64bit pref]
[ 0.309784] pci 0000:05:00.0: supports D1 D2
[ 0.309785] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.273121] r8168 Gigabit Ethernet driver 8.036.00-NAPI loaded
[ 1.273203] r8168 0000:05:00.0: irq 76 for MSI/MSI-X
[ 1.283778] eth%d: 0xffffc9000007e000, 94:de:80:a7:c4:ea, IRQ 76
[ 1.283940] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[ 1.283944] r8168 Copyright (C) 2013 Realtek NIC software team <[email protected]>
[ 1.283944] This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
[ 1.283944] This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[ 8.423951] r8168: eth0: link up
$ cat /var/lib/NetworkManager/NetworkManager.state
[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
WimaxEnabled=true
$ lsmod
8139too 32183 0
r8168 260948 0
$ sudo ethtool eth0
Settings for eth0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: Symmetric Receive-only
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
MDI-X: Unknown
Supports Wake-on: pumbg
Wake-on: g
Current message level: 0x00000033 (51)
drv probe ifdown ifup
Link detected: yes
$ cat syslog (eth0 is the corrupt 8111 controller, eth1 is working)
21:16:56 kernel: [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023ec00000 s84928 r8192 d21568 u262144
21:16:56 kernel: [ 0.000000] pcpu-alloc: s84928 r8192 d21568 u262144 alloc=1*2097152
21:16:56 kernel: [ 0.256453] NET: Registered protocol family 16
21:16:56 kernel: [ 0.342139] NetLabel: Initializing
21:16:56 kernel: [ 0.342141] NetLabel: domain hash size = 128
21:16:56 kernel: [ 0.342142] NetLabel: protocols = UNLABELED CIPSOv4
21:16:56 kernel: [ 0.342150] NetLabel: unlabeled traffic allowed by default
21:16:56 kernel: [ 0.357055] NET: Registered protocol family 2
21:16:56 kernel: [ 0.357763] NET: Registered protocol family 1
21:16:56 kernel: [ 0.897306] audit: initializing netlink socket (disabled)
21:16:56 kernel: [ 1.218874] NET: Registered protocol family 10
21:16:56 kernel: [ 1.219000] NET: Registered protocol family 17
21:16:56 kernel: [ 1.278661] r8168 Gigabit Ethernet driver 8.036.00-NAPI loaded
21:16:56 kernel: [ 1.278738] r8168 0000:05:00.0: irq 76 for MSI/MSI-X
21:16:56 kernel: [ 1.289300] eth%d: 0xffffc9000007e000, 94:de:80:a7:c4:ea, IRQ 76
21:16:56 kernel: [ 1.289452] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
21:16:56 kernel: [ 1.289459] r8168 Copyright (C) 2013 Realtek NIC software team <[email protected]>
21:16:56 kernel: [ 1.292382] 8139cp: 8139cp: 10/100 PCI Et ernet driver v1.3 (Mar 22, 2004)
21:16:56 kernel: [ 1.293719] 8139too: 8139too Fast Etherne driver 0.9.28
21:16:56 kernel: [ 1.294824] 8139too 0000:04:06.0 eth1: RealTek RTL8139 at 0x000000000001c000, 00:30:84:2a:cc:12, IRQ 20
21:16:56 kernel: [ 2.148715] IPv6: ADDRCONF(NETDEV_UP): et 0: link is not ready
21:16:56 kernel: [ 2.148720] IPv6: ADDRCONF(NETDEV_UP): et 1: link is not ready
21:16:56 kernel: [ 2.312197] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
21:16:56 kernel: [ 2.483450] type=1400 audit(1388348216.756:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=751 comm="apparmor_parser"
21:16:56 kernel: [ 2.483604] type=1400 audit(1388348216.756:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=750 comm="apparmor_parser"
21:16:56 kernel: [ 2.483610] type=1400 audit(1388348216.756:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=763 comm="apparmor_parser"
21:16:56 kernel: [ 2.645814] NET: Registered protocol family 31
21:16:56 avahi-daemon[922]: Network interface enumeration completed.
21:16:56 kernel: [ 2.658659] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
21:16:56 NetworkManager[932]: <info> NetworkManager (version 0.9.4.0) is starting...
21:16:56 NetworkManager[932]: <info> Read config file /etc/Ne workManager/NetworkManager.conf
21:16:56 NetworkManager[932]: <info> VPN: loaded org.freedesktop.NetworkManager.pptp
21:16:56 NetworkManager[932]: <info> DNS: loaded plugin dnsmasq
21:16:57 NetworkManager[932]: SCPlugin-Ifupdown: init!
21:16:57 NetworkManager[932]: SCPlugin-Ifupdown: update_system_hostname
21:16:57 NetworkManager[932]: SCPluginIfupdown: management mode: unmanaged
21:16:57 NetworkManager[932]: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:14.4/0000:04:06.0/net/eth1, iface: eth1)
21:16:57 NetworkManager[932]: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:14.4/0000:04:06.0/net/eth1, iface: et 1): no ifupdown configuration found.
21:16:57 NetworkManager[932]: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:15.0/0000:05:00.0/net/eth0, iface: eth0)
21:16:57 NetworkManager[932]: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:15.0/0000:05:00.0/net/eth0, iface: et 0): no ifupdown configuration found.
21:16:57 NetworkManager[932]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo)
21:16:57 NetworkManager[932]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found.
21:16:57 NetworkManager[932]: SCPlugin-Ifupdown: end _init.
21:16:57 NetworkManager[932]: <info> Loaded plugin ifupdown: (C) 2008 Canonical Ltd. To report bugs please use the NetworkManager mailing list.
21:16:57 NetworkManager[932]: <info> Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc. To report bugs please use the NetworkManager mailing list.
21:16:57 NetworkManager[932]: Ifupdown: get unmanaged devices count: 0
21:16:57 NetworkManager[932]: SCPlugin-Ifupdown: (15243056) ... get_connections.
21:16:57 NetworkManager[932]: SCPlugin-Ifupdown: (15243056) ... get_connections (managed=false): return empty list.
21:16:57 NetworkManager[932]: keyfile: parsing 8111 dhcp ...
21:16:57 NetworkManager[932]: keyfile: read connection '8111 dhcp'
21:16:57 NetworkManager[932]: keyfile: parsing working eth card ...
21:16:57 NetworkManager[932]: keyfile: read connection 'working eth card'
21:16:57 NetworkManager[932]: Ifupdown: get unmanaged devices count: 0
21:16:57 NetworkManager[932]: <info> modem-manager is now available
21:16:57 NetworkManager[932]: <info> monitoring kernel firmware directory '/lib/firmware'.
21:16:57 NetworkManager[932]: <info> WiFi enabled by radio killswitch; enabled by state file
21:16:57 NetworkManager[932]: <info> WWAN enabled by radio killswitch; enabled by state file
21:16:57 NetworkManager[932]: <info> WiMAX enabled by radio killswitch; enabled by state file
21:16:57 NetworkManager[932]: <info> Networking is enabled by state file
21:16:57 NetworkManager[932]: <warn> failed to allocate link cache: (-10) Operation not supported
21:16:57 NetworkManager[932]: <info> (eth1): carrier is OFF
21:16:57 NetworkManager[932]: <info> (eth1): new Ethernet device (driver: '8139too' ifindex: 3)
21:16:57 NetworkManager[932]: <info> (eth1): exported as /org/freedesktop/NetworkManager/Devices/0
21:16:57 NetworkManager[932]: <info> (eth1): now managed
21:16:57 NetworkManager[932]: <info> (eth1): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
21:16:57 NetworkManager[932]: <info> (eth1): bringing up device.
21:16:57 NetworkManager[932]: <info> (eth1): carrier now ON (device state 20)
21:16:57 NetworkManager[932]: <info> (eth1): preparing device.
21:16:57 NetworkManager[932]: <info> (eth1): deactivating device (reason 'managed') [2]
21:16:57 NetworkManager[932]: <warn> failed to allocate link cache: (-10) Operation not supported
21:16:57 kernel: [ 2.773422] 8139too 0000:04:06.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
21:16:57 NetworkManager[932]: <info> (eth0): carrier is OFF
21:16:57 NetworkManager[932]: <info> (eth0): new Ethernet device (driver: 'r8168' ifindex: 2)
21:16:57 NetworkManager[932]: <info> (eth0): exported as /org/freedesktop/NetworkManager/Devices/1
21:16:57 NetworkManager[932]: <info> (eth0): now managed
21:16:57 NetworkManager[932]: <info> (eth0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
21:16:57 NetworkManager[932]: <info> (eth0): bringing up device.
21:16:57 NetworkManager[932]: <info> (eth0): preparing device.
21:16:57 NetworkManager[932]: <info> (eth0): deactivating device (reason 'managed') [2]
21:16:57 kernel: [ 2.832528] IPv6: ADDRCONF(NETDEV_UP): et 0: link is not ready
21:16:57 kernel: [ 2.832766] IPv6: ADDRCONF(NETDEV_UP): et 0: link is not ready
21:16:57 NetworkManager[932]: <info> (eth1): device state change: unavailable -> disconnected (reason 'none') [20 30 0]
21:16:57 NetworkManager[932]: <info> Auto-activating connection 'working eth card'.
21:16:57 NetworkManager[932]: <info> Activation (eth1) starting connection 'working eth card'
21:16:57 NetworkManager[932]: <info> (eth1): device state change: disconnected -> prepare (reason 'none') [30 40 0]
21:16:57 NetworkManager[932]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled...
21:16:57 NetworkManager[932]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) started...
21:16:57 NetworkManager[932]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) scheduled...
21:16:57 NetworkManager[932]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) complete.
21:16:57 NetworkManager[932]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) starting...
21:16:57 NetworkManager[932]: <info> (eth1): device state change: prepare -> config (reason 'none') [40 50 0]
21:16:57 NetworkManager[932]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) successful.
21:16:57 NetworkManager[932]: <info> Activation (eth1) Stage 3 of 5 (IP Configure Start) scheduled.
21:16:57 NetworkManager[932]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) complete.
21:16:57 NetworkManager[932]: <info> Activation (eth1) Stage 3 of 5 (IP Configure Start) started...
21:16:57 NetworkManager[932]: <info> (eth1): device state change: config -> ip-config (reason 'none') [50 70 0]
21:16:57 NetworkManager[932]: <info> Activation (eth1) Beginning DHCPv4 transaction (timeout in 45 seconds)
21:16:57 NetworkManager[932]: <info> dhclient started with pid 1058
21:16:57 NetworkManager[932]: <info> Activation (eth1) Beginning IP6 addrconf.
21:16:57 NetworkManager[932]: <info> Activation (eth1) Stage 3 of 5 (IP Configure Start) complete.
21:16:57 dhclient: Internet Systems Consortium DHCP Client 4.1-ESV-R4
21:16:57 dhclient: Copyright 2004-2011 Internet Systems Consortium.
21:16:57 NetworkManager[932]: <info> (eth1): DHCPv4 state changed nbi -> preinit
21:16:57 dhclient: Listening on LPF/eth1/00:30:84:2a:cc:12
21:16:57 dhclient: Sending on LPF/eth1/00:30:84:2a:cc:12
21:16:57 dhclient: DHCPREQUEST of 192.168.188.41 on eth1 to 255.255.255.255 port 67
21:16:57 NetworkManager[932]: <info> (eth1): DHCPv4 state changed preinit -> reboot
21:16:57 NetworkManager[932]: <info> address 192.168.188.41
21:16:57 NetworkManager[932]: <info> prefix 24 (255.255.255.0)
21:16:57 NetworkManager[932]: <info> gateway 192.168.188.1
21:16:57 NetworkManager[932]: <info> nameserver '192.168.188.1'
21:16:57 NetworkManager[932]: <info> domain name 'fritz.box'
21:16:57 NetworkManager[932]: <info> Activation (eth1) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
21:16:57 NetworkManager[932]: <info> Activation (eth1) Stage 5 of 5 (IPv4 Commit) started...
21:16:57 avahi-daemon[922]: Joining mDNS multicast group on interface eth1.IPv4 with address 192.168.188.41.
21:16:57 avahi-daemon[922]: New relevant interface eth1.IPv4 for mDNS.
21:16:57 avahi-daemon[922]: Registering new address record for 192.168.188.41 on eth1.IPv4.
21:16:58 NetworkManager[932]: <info> DNS: starting dnsmasq...
21:16:58 NetworkManager[932]: <error> [1388348218.141241] [nm-dns-dnsmasq.c:393] update(): dnsmasq not available on the bus, can't update servers.
21:16:58 NetworkManager[932]: <error> [1388348218.141259] [nm-dns-dnsmasq.c:395] update(): dnsmasq owner not found on bus: Could not get owner of name 'uk.org.thekelleys.dnsmasq': no such name
21:16:58 NetworkManager[932]: <warn> DNS: plugin dnsmasq update failed
21:16:58 NetworkManager[932]: <info> (eth1): writing resolv.conf to /sbin/resolvconf
21:16:58 NetworkManager[932]: <info> (eth1): device state change: ip-config -> activated (reason 'none') [70 100 0]
21:16:58 NetworkManager[932]: <info> Policy set 'working eth card' (eth1) as default for IPv4 routing and DNS.
21:16:58 NetworkManager[932]: <info> Activation (eth1) successful, device activated.
21:16:58 NetworkManager[932]: <info> Activation (eth1) Stage 5 of 5 (IPv4 Commit) complete.
21:16:58 NetworkManager[932]: <warn> dnsmasq appeared on DBus: :1.24
21:16:58 NetworkManager[932]: <info> (eth1): writing resolv.conf to /sbin/resolvconf
21:16:58 avahi-daemon[922]: Joining mDNS multicast group on interface eth1.IPv6 with address fe80::230:84ff:fe2a:cc12.
21:16:58 avahi-daemon[922]: New relevant interface eth1.IPv6 for mDNS.
21:16:58 avahi-daemon[922]: Registering new address record for fe80::230:84ff:fe2a:cc12 on eth1.*.
21:16:59 kernel: [ 4.842503] r8168: eth0: link up
21:17:01 kernel: [ 6.852980] r8168: eth0: link up
21:17:01 kernel: [ 6.853014] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
21:17:01 NetworkManager[932]: <info> (eth0): carrier now ON (device state 20)
21:17:01 NetworkManager[932]: <info> (eth0): device state change: unavailable -> disconnected (reason 'carrier-changed') [20 30 40]
21:17:01 NetworkManager[932]: <info> Auto-activating connection '8111 dhcp'.
21:17:01 NetworkManager[932]: <info> Activation (eth0) starting connection '8111 dhcp'
21:17:01 NetworkManager[932]: <info> (eth0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
21:17:01 NetworkManager[932]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled...
21:17:01 NetworkManager[932]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) started...
21:17:01 NetworkManager[932]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) scheduled...
21:17:01 NetworkManager[932]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) complete.
21:17:01 NetworkManager[932]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) starting...
21:17:01 NetworkManager[932]: <info> (eth0): device state change: prepare -> config (reason 'none') [40 50 0]
21:17:01 NetworkManager[932]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) successful.
21:17:01 NetworkManager[932]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled.
21:17:01 NetworkManager[932]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) complete.
21:17:01 NetworkManager[932]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) started...
21:17:01 NetworkManager[932]: <info> (eth0): device state change: config -> ip-config (reason 'none') [50 70 0]
21:17:01 NetworkManager[932]: <info> Activation (eth0) Beginning DHCPv4 transaction (timeout in 45 seconds)
21:17:01 NetworkManager[932]: <info> dhclient started with pid 1997
21:17:01 NetworkManager[932]: <info> Activation (eth0) Beginning IP6 addrconf.
21:17:01 NetworkManager[932]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) complete.
21:17:01 dhclient: Internet Systems Consortium DHCP Client 4.1-ESV-R4
21:17:01 dhclient: Copyright 2004-2011 Internet Systems Consortium.
21:17:01 NetworkManager[932]: <info> (eth0): DHCPv4 state changed nbi -> preinit
21:17:01 dhclient: Listening on LPF/eth0/94:de:80:a7:c4:ea
21:17:01 dhclient: Sending on LPF/eth0/94:de:80:a7:c4:ea
21:17:01 dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3
21:17:02 avahi-daemon[922]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::96de:80ff:fea7:c4ea.
21:17:02 avahi-daemon[922]: New relevant interface eth0.IPv6 for mDNS.
21:17:02 avahi-daemon[922]: Registering new address record for fe80::96de:80ff:fea7:c4ea on eth0.*.
21:17:02 NetworkManager[932]: <warn> error monitoring device for netlink events: error processing netlink message: Object busy
21:17:04 dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
21:17:11 dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15
21:17:13 NetworkManager[932]: <warn> error monitoring device for netlink events: error processing netlink message: Object busy
Odpowiedzi:
Odwiedź Realtek> Karty sieciowe> 10/100 / 1000M Gigabit Ethernet> PCI Express> oprogramowanie> Unix (Linux) i pobierz źródło sterownika dla swojej wersji jądra.
źródło
lshw -C network
jakUNCLAIMED
. Po zainstalowaniu sterownika z Realtek Wi-Fi nadal nie działa, a nawet przewodowe przestaje działać. Na razie mam zainstalowany Ubuntu 14 i używam starego WiFi USB.Miałem ten sam problem od lat i przy każdej aktualizacji dotyczącej jądra, która uruchamia się ponownie po odłączeniu sieci, mam problem. Wyłącz urządzenie, wyciągnij wtyczkę, przytrzymaj przycisk zasilania przez sekundę lub dwie i spróbuj ponownie. Jeśli to się nie powiedzie, usuń /etc/udev/rules.d/70-persistent-net.rules i zrestartuj komputer zwykle.
źródło
Poruszaj kablem i przesuń go do tyłu
Windows był w porządku, łącząc się z moją siecią Ethernet i uzyskując adres IP i dostęp do Internetu. Ubuntu również na początku dobrze się łączyło. Po pewnym czasie, kiedy uruchamiałem się w Ubuntu, w ogóle nie miałem sieci, chociaż nadal miałem Windows.
Postanowiłem zobaczyć, co się stanie z migającymi diodami LED w porcie LAN, ponieważ kiedy monitowałem,
ifconfig eth0
nie miałem adresu IP ani żadnej aktywności pakietu.Rozwiązaniem problemu (który dziwnie występował tylko w Ubuntu) było lekkie poruszenie kablem i przesunięcie go nieco do tyłu.
źródło